Showing posts with label taurus fan. Show all posts
Showing posts with label taurus fan. Show all posts

Saturday, March 3, 2012

September 5, 2011

September 5, 20011
Had a Ford Taurus Fan lying around from the Jeep, decided to see how it fit the Daytona radiator, it well well! The stock fan moves around 1000CFM from what've I've seen on the forums. This moves 4000-4500CFM on its high setting, and its thinner than the stock fan!

The alternator was installed, I bought new heater hoses to by-pass the heater control valve, oil line for the turbo was installed, clutch cable and shifter cables have been connected, throttle cable is hooked up.

Forgot about the water line on the back of the block though, so I'll have to wrestle with that, or I might just plug the line instead of the block and call it good

Taurus Fan

__________________

August 28. 2011

My Taurus fan seems to fit my radiator perfectly (ok, almost). The Taurus fan is thinner and flows more air than the factory fan (by nearly 3500 CFM).

I also plan to move the heater control valve elsewhere. It kind of gets in the way with intercooler piping.

I am also going to get my suspension parts painted, and ready to be installed. I have new struts, new strut mounts, crossmember, control arms, poly control arm bushings, new ball joints, and new tie rod ends ready to be put in. I would also like to take out the steering rack and warranty it for boots that are degrading.